WAC 2.5in Low Voltage Remodel Recessed Housing with White 8W 500 Lumens MR16 LED Lamp Included

Electronic Non-Ic Remodel Housing - With Mr16 LED Bulb. 3-Inch Low Voltage Recessed Downlights. Superb Performance Packed Into A Small Package, 3-Inch Low Voltage Recessed Downlights Offer Crisp White Beams Of Light For Under Cabinet And Tight Spaces Where Miniature Apertures Are Required.. Integral Electronic Transformer. Advanced Auto-Reset, Soft Start And Short Circuit Protection. 3" Clearance On All Sides When Insulation Is Present. Suitable For Chain Wiring. J-Box And Transformer Accessible Through Ceiling Opening. Suitable For Damp Locations. Ul And Cul Listed.

• CONSTRUCTION: Integral electronic 12V transformer with 120V input, 1W minimum load, and 50W maximum. Available in a remodel housing HR-801, or in a new construction housing to install in ceilings with exposed rafters HR-802.
• INSTALLATION: May be used with any WAC compatible 2.5 inch HR-837 or HR-836 trims.
• FEATURES: Transformer can be accessed in the housing through the ceiling opening, allowing for ease of service over time. Simple to install with three convenient knockouts provided for electrical wiring and connections. Suitable for chain wiring multiple lights.
• SPECIFICATIONS: DIMMING & SPECIFICATIONS: Smooth and continuous dimming with an electronic low voltage (ELV) dimmer. Dims down 10% with ELV dimmers.
• SPECIFICATIONS 2: MR16 socket can accept any MR16 LED or Incandescent lamp 50W max. Model #'s HR-801-LED and HR-802-LED come equipped with a White or Black MR16 LED lamp, Power: 8W, Delivered Lumens: 500lm, CRI: 90, Color Temperature: 3000, Rated Hours: 25000.
• STANDARDS: ETL & cETL UL # 1598 listed for Dry or Damp Locations. Non IC-Rated, must be installed with 3in clearance from insulation.